A Division of Kinzie's Closet


Risport Figure Skate Sizing Chart

Copyright © Ice Skates & Blades. All rights reserved

BEFORE YOU BEGIN MEASURING!!!


Please read Measuring Feet for Skates


Measurements are very important. Use these charts for finding your size in Risport Skates and to get the correct blade size for your Risport boots. These measurements should not be used for any other brand of figure or ice skate. Risport sizes their skates for a snug and proper fit. The toe will be slightly touching the inside of the boot.  If you would like to have some extra wiggle room in the skates, then add 1/2 size up (or .5 cm) to your foot measurement.


Please note!  We have provided the measurements shown below to assist you in finding your correct size in a Risport figure skate. However, Ice Skates & Blades/Kinzie's Closet is not responsible for skates that have been sized incorrectly.


We strongly recommend that you have another person read the tape measure for you as the measurements are fairly exact. Please feel free to e-mail us at iceskatesnblades@kinziescloset.com with any questions you may have.


RISPORT LENGTH IS MEASURED IN MONDOPOINT
TAKE YOUR FOOT MEASUREMENT IN CENTIMETERS (CM)
THEN ADD 1 CM TO YOUR MEASUREMENT TO GET YOUR BOOT SIZE.
 


For example, if your foot measures 25 cm in length, then your boot size would be 26.  As mentioned above if you want more wiggle room for your toes or you want room for growth, please add 1.5 cm to get your boot size.


To get the correct blade size for your Risport boot,  find your boot size listed below and look to the right of the chart to get the blade size.  If you are unsure about your boot size, measure the sole length of your boot in inches. When measuring blades to fit boots, the blade will typically be 1/4" shorter than the boot sole length. So, for instance if the sole length of your boot measures 10.5" long, then you would want to purchase a blade that will be 10.25" long.